Skip to main content
SmartGlass USA Corporation logo Check Project Fit

Dallas project report · Black SmartVinyl

A more private Dallas bedroom, with the patio doors already in place.

For one Dallas homeowner, sunlight at dawn and exterior lights after dark made a glazed bedroom door uncomfortable. Privacy had to work around the home’s light, patio view and existing controls.

Black SmartVinyl was installed on the existing glass, with remote control, a wall switch and integration into the homeowner’s Lutron system. The installation took a day and a half.

Watch the original installation Discuss my bedroom doors
Dallas bedroom patio-door privacy — more open view, project visualization
Dallas bedroom patio-door privacy — privacy view, project visualization
Project visualizations based on the installation. Move the slider to compare the appearance; the original video below shows the installed system.
The glass
Kept in place
Installation
1½ days
Home integration
Existing Lutron system
Warranty
3 years

The homeowner’s brief

The homeowner wanted a calmer bedroom at dawn and after dark.

The glazed doors connected the bedroom to the patio, bringing an open view into a personal space. The homeowner wanted to keep that connection while deciding when the room should feel secluded.

Morning sunlight arriving through the glass was part of the problem. So were exterior lights after sunset and the feeling that someone outside could see into the bedroom. The wider comfort brief also included noise, thermal comfort and UV protection.

The installation had to fit an occupied home: retain the existing doors and glass, avoid demolition and leave the room ready to use. SmartGlass USA built the project around those requirements.

The original installationDallas bedroom · 17 seconds

Original project footage supplied by SmartGlass USA. The video shows the darker bedroom setting and the more open daytime view through the installed glass.

Why this project was different

Black SmartVinyl changes with the light around the home.

The finish was selected for this bedroom’s light and privacy needs, rather than for a standard white, frosted appearance.

In strong daylight

A lighter appearance from inside

With sunlight on the glass, the black SmartVinyl can appear whitish from the bedroom. Operating the control changes it to a more open, semi-transparent view toward the patio.

As evening falls

A darker bedroom setting

As daylight fades, the glass loses its bright appearance and takes on the darker look the homeowner wanted at night. The darker setting helps keep early sunlight and unwanted exterior light from disturbing the room.

Seen from outside

A black appearance that shields the room

In this installation, the exterior retains a black appearance that conceals the bedroom interior, including when the homeowner selects the more open view from inside.

A retrofit for an occupied home

Installed on the homeowner’s glass in a day and a half.

The existing doors, frames and glass stayed in place. Black SmartVinyl was applied to the glass, so this project did not require replacing the door assembly or opening the room up for demolition.

The work was planned as a coordinated installation: the privacy finish, the controls and the connection to the homeowner’s existing system. It was a clean, contained upgrade for a room the client already lived in.

Explore a retrofit for my home
Architectural reference: glazed double entry doors with a translucent privacy appearance
Glazed-entry architecture
Architectural reference: black iron-framed double doors with glass panels
Iron-framed glass doors

Architectural references from the SmartGlass website. These are separate from the Dallas bedroom installation.

Controls that fit the home

A remote, a wall switch and the Lutron system the homeowner already used.

The homeowner could operate the glass directly from the remote or wall switch. SmartGlass USA also incorporated this installation into the home’s existing Lutron setup, keeping privacy control within the client’s familiar home-control routine.

The control plan starts with the equipment already in the home and the owner’s preferred routine.

Another Dallas home, another privacy finish

A front entry can call for a lighter, translucent look.

A separate Dallas entry-door installation shows a different direction: open views when wanted and a light, translucent privacy appearance when the glass is switched.

The black bedroom finish and this entry-door finish answer different briefs. Seeing them together helps a homeowner choose the appearance that belongs in each room.

Explore privacy for glass front doors
Dallas entry-door privacy — more open view, project visualization
Dallas entry-door privacy — privacy view, project visualization
Entry-project visualizations based on the originals.

Original Dallas entry-door installation video.

Questions homeowners ask

What would a similar project involve in your home?

The useful starting point is your existing glass, the light around the room and the way you want to use it.

Can I keep my existing patio doors and glass?

That is what happened in this Dallas bedroom. Black SmartVinyl was applied to the homeowner’s existing glass. SmartGlass USA reviews the glass and the desired appearance before confirming the same approach for another home.

Will installation turn the bedroom into a building site?

This project was completed in a day and a half without replacing the doors or glass and without demolition. The installation and controls were coordinated as one scope. The timetable for your home is agreed around its own opening and control requirements.

Will I still be able to see toward the patio?

In this black SmartVinyl installation, the homeowner can select a semi-transparent daytime view using the controls. It is not the same appearance as untreated clear glass; the original project video shows the installed result.

Can the privacy glass work with my Lutron system?

The Dallas bedroom installation was incorporated into the homeowner’s existing Lutron home-control system, alongside a remote and wall switch. Share the system you already use so that integration can be planned for your project.

What warranty and switching performance does SmartGlass USA state?

For this system, SmartGlass USA states a three-year warranty, two million switching cycles and an on/off switching time of 0.01 second maintained over those cycles.

Can we discuss a home elsewhere in Dallas–Fort Worth?

Yes. Start with your city or ZIP code, photos of the glass and the light or privacy problem you want to solve. SmartGlass USA reviews residential privacy projects across the Dallas–Fort Worth area.

For Dallas–Fort Worth homeowners

Start with the light, the view and the way you live.

Planning privacy for a home in Dallas, Fort Worth, Highland Park, University Park, Southlake, Westlake, Frisco, Plano or Colleyville? Tell us which room needs to change, what you want to keep and how you already control your home.

Plan my home privacy smartglass@smartglass.icu