Silver Conductive Paste ā Professional Electrical Adhesive for PDLC Smart Glass Busbars
High-conductivity silver paste for attaching busbars and electrodes to PDLC smart film
$300.00
Out of stock
š Description
The Silver Conductive Paste is a specialized adhesive made with micron-sized silver particles suspended in a resin or polymer base. It is used to create highly conductive electrical joints where traditional soldering or mechanical connections are not suitable.
In PDLC smart film and smart glass installations, silver paste is widely applied to:
āļø Attach copper busbars to the conductive ITO (Indium Tin Oxide) layer of the smart film
āļø Ensure stable electrical contact between transformer cables and film electrodes
āļø Provide a thin, uniform, and conductive layer without damaging the glass
š Technical Specifications
Composition: Silver particles (high purity) + polymer binder
Conductivity: < 0.02 Ī©Ā·cm (typical)
Curing method: Air dry or heat cure (depending on brand, usually at 80ā120 Ā°C)
Viscosity: Paste form ā easy to apply with a brush, syringe, or dispenser
Color: Metallic grey/silver
Packaging: Bottles or syringes (50 g)
š How to Use
Surface preparation ā clean PDLC busbar/ITO glass surface with isopropyl alcohol or dust-free cloth.
Application ā apply a thin layer of silver paste onto the busbar or contact point using a fine brush or syringe.
Attachment ā press the copper strip or connector gently against the applied area.
Curing ā allow to dry at room temperature or cure with mild heating (per manufacturer instructions).
Final check ā test conductivity with a multimeter before powering the system.
šÆ Recommended Applications
PDLC Smart Film busbar installation
Smart Glass electrode connections
PCB and circuit board repair
EMI shielding and conductive coatings
Flexible electronics
š¦ Package Includes
1Ć Bottle of Silver Conductive Paste (choose size: 10 g / 50 g / 100 g)
